---
title: Pump Faults
description: "A pump fault message appearing on your controller or B-hyve app typically means that your controller is detecting a short in the wire connected to the PUMP terminal. An easy test to do is removing the wire from the PUMP…"
url: "https://husqvarna-water.com/knowledgebase/pump-faults/"
updated: "2024-07-02"
category: Controller
tags:
  - Controller
  - Error codes
  - HRC400
  - Pumps
  - Troubleshoot
---

# Pump Faults

A pump fault message appearing on your controller or B-hyve app typically means that your controller is detecting a short in the wire connected to the PUMP terminal.

An easy test to do is removing the wire from the PUMP terminals in your controller. Then attempt to run a station or program manually.

- If the fault message does not appear, there's an issue with the pump, pump wiring, or pump start relay
- If the fault message appears, then the controller should be replaced.

Once the issue is resolved, run a program or manually operate a station. Once this test is completed successfully the fault will be cleared.
