With Husqvarna’s HRN 100 fixed-arc nozzles, you can simplify your work without sacrificing quality or functionality. How? For starters, each distance is indicated by nozzle pattern- so you won’t waste your time digging in your truck to find the right one. All HRN 100s have pattern identifiers on top to indicate their particular spray radius.

FEATURES AND BENEFITS

Fastest to Find—Bottoms are pattern-identified according to spray radius, making identification a snap. Nozzles and filters come in separate, re-sealable bags for complete organization.
Fastest to Install—Coin-edging around top of nozzle gives excellent grip-ability no matter the conditions.
Fastest to Fine Tune—Exclusive adjustment slot allows use of a screwdriver to fine tune distance adjustment during operation, without intruding into the spray pattern.
Lower Precipitation Rate—Matched precipitation, combined with outstanding distribution uniformity and lower precipitation rate than competition, generates improved efficiency.
Arc Edge Technology—Three-piece design provides best-in-class right and left arc edges, optimizing distribution uniformity.
Oversized Filter—Large .02 x .02 blue mesh filter reduces maintenance and ensures precipitation rate remains at optimal levels longer.
Knurled Nozzle Top Edging—Ensures positive installation.
Pattern-Identified Tops—Eliminates all guesswork by specifically identifying nozzle spray pattern.
Three-piece Design—Nozzle stop stays flush to wiper seal across full range of arc adjustment, minimizing susceptibility to damage from lawn equipment and traffic.
Stainless Steel Adjustment—Slotted screw provides precise radius adjustment.
Blue Filter Screen—.02 x .02 filter screen included standard.
Compatibility—Fits Husqvarna^®, Rain Bird^®, and Hunter^®.

Weight	N/A
Dimensions	N/A
Arc or Pattern	Center Strip Pattern, End Strip Pattern, Full Arc, Half Arc, Quarter Arc, Side Strip Pattern
Radius	10 Feet, 12 Feet, 15 Feet, 8 Feet
Operating pressure	30 PSI
Pressure Range	15 – 150 PSI

Documentation

HRN-100 Fixed Nozzle Pattern Technical sheet

Nozzle	Pattern	Arc	pressure (psi)	Radius (ft)	FLOW (GPM)	Precip rate SQ (in/hr)	Precip rate Tri (in/hr)
8A	Quarter	90	20	7	0.29	2.26	2.60
8A	Quarter	90	25	8	0.32	2.09	2.42
8A	Quarter	90	30	8	0.35	1.94	2.24
8A	Quarter	90	35	9	0.37	1.78	2.05
8A	Quarter	90	40	9	0.40	1.76	2.03
8A	Half	180	20	7	0.57	2.26	2.60
8A	Half	180	25	8	0.64	2.09	2.42
8A	Half	180	30	8	0.70	1.94	2.24
8A	Half	180	35	9	0.75	1.78	2.05
8A	Half	180	40	9	0.80	1.76	2.03
8A	Full	360	20	7	1.15	2.26	2.60
8A	Full	360	25	8	1.28	2.09	2.42
8A	Full	360	30	8	1.40	1.94	2.24
8A	Full	360	35	9	1.50	1.78	2.05
8A	Full	360	40	9	1.59	1.76	2.03
10A	Quarter	90	20	9	0.42	2.00	2.31
10A	Quarter	90	25	10	0.47	2.00	2.31
10A	Quarter	90	30	10	0.52	1.99	2.30
10A	Quarter	90	35	11	0.56	1.95	2.25
10A	Quarter	90	40	11	0.60	1.91	2.21
10A	Half	180	20	9	0.84	2.00	2.31
10A	Half	180	25	10	0.94	2.00	2.31
10A	Half	180	30	10	1.04	1.99	2.30
10A	Half	180	35	11	1.12	1.95	2.25
10A	Half	180	40	11	1.20	1.91	2.21
10A	Full	360	20	9	1.68	2.00	2.31
10A	Full	360	25	10	1.88	2.00	2.31
10A	Full	360	30	10	2.07	1.99	2.30
10A	Full	360	35	11	2.24	1.95	2.25
10A	Full	360	40	11	2.40	1.91	2.21
12A	Quarter	90	20	12	0.61	1.76	2.03
12A	Quarter	90	25	12	0.68	1.81	2.09
12A	Quarter	90	30	13	0.74	1.83	2.11
12A	Quarter	90	35	13	0.80	1.83	2.11
12A	Quarter	90	40	14	0.86	1.81	2.09
12A	Half	180	20	12	1.21	1.76	2.03
12A	Half	180	25	12	1.35	1.81	2.09
12A	Half	180	30	13	1.48	1.83	2.11
12A	Half	180	35	13	1.60	1.83	2.11
12A	Half	180	40	14	1.71	1.81	2.09
12A	Full	360	20	12	2.42	1.76	2.03
12A	Full	360	25	12	2.71	1.81	2.09
12A	Full	360	30	13	2.96	1.83	2.11
12A	Full	360	35	13	3.21	1.83	2.11
12A	Full	360	40	14	3.42	1.81	2.09
15A	Quarter	90	20	14	0.76	1.61	1.86
15A	Quarter	90	25	14	0.85	1.67	1.93
15A	Quarter	90	30	15	0.96	1.75	2.02
15A	Quarter	90	35	15	1.03	1.77	2.04
15A	Quarter	90	40	16	1.11	1.77	2.05
15A	Half	180	20	14	1.52	1.61	1.86
15A	Half	180	25	14	1.70	1.67	1.93
15A	Half	180	30	15	1.91	1.75	2.02
15A	Half	180	35	15	2.07	1.77	2.04
15A	Half	180	40	16	2.21	1.77	2.05
15A	Full	360	20	14	3.05	1.61	1.86
15A	Full	360	25	14	3.41	1.67	1.93
15A	Full	360	30	15	3.83	1.75	2.02
15A	Full	360	35	15	4.13	1.77	2.04
15A	Full	360	40	16	4.42	1.77	2.05

HRN 100 Nozzle Performance Published 2020JUN31. Radius is rounded to the nearest foot, 30 PSI (2.1 bar) is the recommended pressure & adjusting the radius reduction screw/diffuser screw may be required to achieve catalog distance and flow.

Nozzle	Pattern	Arc	Pressure (BAR)	Radius (m)	Flow (m^3/hr)	Flow (L/s)	Precip SQ (mm/hr)	Precip TRI (mm/hr)
8A	Quarter	90	1.4	2.1	0.07	0.02	57.28	66.15
8A	Quarter	90	1.7	2.3	0.07	0.02	53.15	61.38
8A	Quarter	90	2.1	2.5	0.08	0.02	49.17	56.78
8A	Quarter	90	2.4	2.7	0.08	0.02	45.15	52.13
8A	Quarter	90	2.8	2.8	0.09	0.03	44.68	51.59
8A	Half	180	1.4	2.1	0.13	0.04	57.28	66.15
8A	Half	180	1.7	2.3	0.14	0.04	53.15	61.38
8A	Half	180	2.1	2.5	0.16	0.04	49.17	56.78
8A	Half	180	2.4	2.7	0.17	0.05	45.15	52.13
8A	Half	180	2.8	2.8	0.18	0.05	44.68	51.59
8A	Full	360	1.4	2.1	0.26	0.07	57.28	66.15
8A	Full	360	1.7	2.3	0.29	0.08	53.15	61.38
8A	Full	360	2.1	2.5	0.32	0.09	49.17	56.78
8A	Full	360	2.4	2.7	0.34	0.09	45.15	52.13
8A	Full	360	2.8	2.8	0.36	0.10	44.68	51.59
10A	Quarter	90	1.4	2.7	0.10	0.03	50.73	58.58
10A	Quarter	90	1.7	2.9	0.11	0.03	50.82	58.68
10A	Quarter	90	2.1	3.0	0.12	0.03	50.63	58.47
10A	Quarter	90	2.4	3.2	0.13	0.04	49.59	57.26
10A	Quarter	90	2.8	3.4	0.14	0.04	48.52	56.02
10A	Half	180	1.4	2.7	0.19	0.05	50.73	58.58
10A	Half	180	1.7	2.9	0.21	0.06	50.82	58.68
10A	Half	180	2.1	3.0	0.24	0.07	50.63	58.47
10A	Half	180	2.4	3.2	0.25	0.07	49.59	57.26
10A	Half	180	2.8	3.4	0.27	0.08	48.52	56.02
10A	Full	360	1.4	2.7	0.38	0.11	50.73	58.58
10A	Full	360	1.7	2.9	0.43	0.12	50.82	58.68
10A	Full	360	2.1	3.0	0.47	0.13	50.63	58.47
10A	Full	360	2.4	3.2	0.51	0.14	49.59	57.26
10A	Full	360	2.8	3.4	0.55	0.15	48.52	56.02
12A	Quarter	90	1.4	3.5	0.14	0.04	44.76	51.68
12A	Quarter	90	1.7	3.7	0.15	0.04	45.95	53.06
12A	Quarter	90	2.1	3.8	0.17	0.05	46.38	53.55
12A	Quarter	90	2.4	4.0	0.18	0.05	46.39	53.57
12A	Quarter	90	2.8	4.1	0.19	0.05	45.90	53.00
12A	Half	180	1.4	3.5	0.27	0.08	44.76	51.68
12A	Half	180	1.7	3.7	0.31	0.09	45.95	53.06
12A	Half	180	2.1	3.8	0.34	0.09	46.38	53.55
12A	Half	180	2.4	4.0	0.36	0.10	46.39	53.57
12A	Half	180	2.8	4.1	0.39	0.11	45.90	53.00
12A	Full	360	1.4	3.5	0.55	0.15	44.76	51.68
12A	Full	360	1.7	3.7	0.61	0.17	45.95	53.06
12A	Full	360	2.1	3.8	0.67	0.19	46.38	53.55
12A	Full	360	2.4	4.0	0.73	0.20	46.39	53.57
12A	Full	360	2.8	4.1	0.78	0.22	45.90	53.00
15A	Quarter	90	1.4	4.1	0.17	0.05	40.87	47.19
15A	Quarter	90	1.7	4.3	0.19	0.05	42.52	49.10
15A	Quarter	90	2.1	4.4	0.22	0.06	44.50	51.39
15A	Quarter	90	2.4	4.6	0.23	0.07	44.93	51.88
15A	Quarter	90	2.8	4.7	0.25	0.07	45.00	51.96
15A	Half	180	1.4	4.1	0.35	0.10	40.87	47.19
15A	Half	180	1.7	4.3	0.39	0.11	42.52	49.10
15A	Half	180	2.1	4.4	0.43	0.12	44.50	51.39
15A	Half	180	2.4	4.6	0.47	0.13	44.93	51.88
15A	Half	180	2.8	4.7	0.50	0.14	45.00	51.96
15A	Full	360	1.4	4.1	0.69	0.19	40.87	47.19
15A	Full	360	1.7	4.3	0.77	0.21	42.52	49.10
15A	Full	360	2.1	4.4	0.87	0.24	44.50	51.39
15A	Full	360	2.4	4.6	0.94	0.26	44.93	51.88
15A	Full	360	2.8	4.7	1.00	0.28	45.00	51.96

HRN 100 Nozzle Performance Published 2020JUN31. Radius is rounded to the nearest foot, 30 PSI (2.1 bar) is the recommended pressure & adjusting the radius reduction screw/diffuser screw may be required to achieve catalog distance and flow.

HRN-100 Fixed Nozzle in Arc or Pattern End Strip Pattern and Radius 15 Feet

FEATURES AND BENEFITS

Documentation

Performance Chart - Imperial

30

30

30

30

30

30

30

30

30

30

30

30

Performance Chart - Metric

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.1

You may also like…

Find a Dealer

Address

Product lines

Filter

Product Categories

HRN-100 Fixed Nozzle in Arc or Pattern End Strip Pattern and Radius 15 Feet

FEATURES AND BENEFITS

Documentation

Performance Chart - Imperial

30

30

30

30

30

30

30

30

30

30

30

30

Performance Chart - Metric

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.1

2.1

You may also like…

Login

Address

Product lines

Filter

Product Categories