High Station Count Controller

The High Station Count (HSC) commercial irrigation controller brings a range of connectivity to B-hyve, the #1 irrigation platform in the world. The HSC provides WeatherSense programming with remote monitoring and control for projects large and small.

The HSC and B-hyve can provide water managers with total control over programming whether they want fully automatic daily adjustments with WeatherSense programming, traditional programming, or somewhere in between. The HSC can control up to 48 stations and power two stations simultaneously. The convenient modular design allows for station expansion in 8-station increments.

HSC Features and Benefits

• Built-in Wi-Fi (2.4 GHz and 5 GHz), Bluetooth, and Ethernet for easy connectivity
• Optional cellular module (sold separately) allows for remote operation when a local area network is not available
• The large full-color display provides vital information at the device
• Two Master valve/pump circuits ensure you have the hydraulic control you need.
• Non-Volatile memory stores programming for watering after a power outage
• Manual watering by program or station, so you only water the areas you want
• Master valve/pump on/off by station for greater control over watering

B-hyve Features and Benefits

• WeatherSense programming can issue daily programming adjustments, which can provide up to 30% in water savings
• Built-in irrigation audit allows for faster system audits and improved water savings
• Delay Watering up to 32 days, perfect for large events or big storms
• Seasonally adjust irrigation by program with “Watering Budget” to optimize irrigation without altering the original program.

Weight	16 lbs
Dimensions	21.13 × 14.13 × 8 in
B-hyve Connected Device	Yes
Bluetooth Compatibility	5
Bluetooth Range	150 Feet
Cable/Wire Type	12 AWG
Certifications	EPA WaterSense, FCC, IP 68, UL
EPA WaterSense Approved	Yes
Hub Included	Built in
Mounting Location	Outdoor
P/MV output (24 VAC)	0.32 A
Programming Schedule	Days of week, watering intervals, odd/even days, Smart
Pump Start Relay	2 Terminal
Smart / Web Access	B-hyve Pro or B-hyve
Smart Home Compatibility	Alexa, Google
Solenoid Holding Current	0.56 A @ 24 VAC
Station Count	16
Station output (24 VAC)	0.56 A
Transformer input	100-240 V AC
Transformer output	3.3 A
Wi-Fi Bandwidth	2.4 GHz, 5 GHz
Wi-Fi Range	2.4 GHz – 60 to 820 ft, 5 GHz – 190 to 460 ft

Certifications

INPUT AC 120V 0.2A

OUTPUT AC 26V 3A
0–70° C AT 6000 CYCLES
CLASS 2 TRANSFORMER USED TRANSFOMER DE CLASSE 2 UTILISÉ
CERTIFIED TO CAN/CSA C22.2 NO 205-12 ANSI/UL 1951
FCC ID: ML6HSC
IC/ISED: 3330A-HSC
HVIN: HSC
ASSEMBLED IN THE US
WITH GLOBAL MATERIALS
ASSEMBLÉ AUX ÉTATS˜UNIS AVEC
DU MATÉRIEL INTERNATIONAL

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause  harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

ISED Warning

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Cet appareil est conforme aux CNR exemptes de licence d’Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes :

1. Ce dispositif ne peut causer d’interférences ; et
2. Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l’appareil.

Le dispositif a été conçu pour répondre à la demande générale de radioexposition.

 

 

 

TA: 2022/1541

Approval Certificate

Manuals

[fliph5 id=”aerit-wdfq” width=”900px” height=”500px”]

[fliph5 id="aerit-sidf" width="900px" height="500px"]