Controller
Battery Powered
Last Updated: August 26, 2024
Control and Monitoring System
Last Updated: November 1, 2024
ETwater Controller
Last Updated: November 14, 2024
HermitCrab pro
Last Updated: November 1, 2024
High Station Count Controller
Last Updated: November 21, 2024
HRC 100
Last Updated: April 23, 2025
HRC 400 Series
Last Updated: November 1, 2024
HRC 410
Last Updated: November 1, 2024
Two-wire
Last Updated: June 11, 2024
XR
Last Updated: November 1, 2024
B-hyve Device Sharing
Last Updated: July 2, 2024Sharing a B-hyve device is very easy to do right from your B-hyve application. To share the device with someone else: Open the B-hyve Pro or B-hyve app Tap “My B-hyve” and then tap “Devices“ Select the device you want to share access to Tap “Device Sharing“ Choose between Guest and Manager (Managers have access...
Pump Faults
Last Updated: July 2, 2024A pump fault message appearing on your controller or B-hyve app typically means that your controller is detecting a short in the wire connected to the PUMP terminal. An easy test to do is removing the wire from the PUMP terminals in your controller. Then attempt to run a station or program manually. If the...
Smart Irrigation Controller FAQ
Last Updated: November 1, 2024WHAT ARE SMART CONTROLLERS? Smart controllers, also known as weather-based controllers or “ET-based” controllers, adjust their irrigation schedules automatically based on daily weather changes and estimated plant water requirements. WHAT IS ET? ET is a common abbreviation you may hear about smart controllers. It is short for “evapotranspiration.” In horticulture, evapotranspiration measures the amount of...